When assembling HVDC power supply wire kits in many workshops, sometimes they don't pay much attention to it. This allows the high voltage DC power supply to be deployed unexpectedly during use, leaving the wires exposed. Such high-voltage DC power supplies are also very prone to failure. Then imagine, if you want to repair a machine, when you open the outer packing board and see a mess of wires, you must want to send the machine straight away, do not want to repair it. This is the function of the high voltage DC power supply wire kit.

 

500kW load bank
 

Fortunately, with the development of science and technology, the high voltage DC power cable has been assisted by the kit. It is much more convenient than before. In the previous manual era, high voltage DC power cables were more difficult to place. Therefore, now is the era of continuous circuit boards directly using wire kits. However, if the wire kit is long, everyone's wiring will be different, and it will be difficult to assemble the exact same product. Therefore, it is sometimes necessary to organize wire kits. In addition, welding and strapping are complete operations. However, the current trend in high voltage DC power wiring is to use connectors instead of welding whenever possible, which is a manual method.

From the point of view of the manufacturer's production site and service, from the point of view of improving work efficiency, the choice of high voltage DC power wire kit is inevitable. In the manufacturing of goods, especially mass-produced goods, the trend toward eliminating human labor may be irreversible. Therefore, from the point of view of producing stable quality products at lower prices, it is essential to improve work efficiency. The result is to speed up the process of "one-use" products. Of course, it can be fixed, but there are problems such as how to get parts, and generally set the support period after production stops. As a result, you end up with a situation where the equipment bracket wants to be repaired but can't be.

Moreover, if a manufacturer were unlucky enough to go bust, it could not be repaired even during the support period. Eventually it has to be scrapped. I do not know from when, electrical products are no longer owned by owners after purchase, and the power of life and death is still firmly in the hands of manufacturers.